Bona 3-in-1 silane adhesives give you confidence knowing that you can provide a solid long-term foundation for any timber floor. In fact, Bona superior quality adhesives have been used to install more than 130 million square metres of timber floors worldwide.

Bona silane adhesives are effective on a variety of sub-floor types including ply, particle board, concrete, radiant-heat floors and even stainless steel. With built-in moisture protection up to 95% RH and acoustic insulation properties, Bona adhesives are the perfect balance between elasticity and strength. Using Titanium Cross-linking technology with 4-way curing means fast initial bond and curing time so floors can be put into full use or sanded and finished in as little as 12 hours.

With up to 150% greater early tensile strength than other elastic and hard elastic flooring adhesives, Bona silane adhesives' superior initial bond or ‘Green Grab’ means the flooring is held firmly to the substrate with fewer hollow spots. In addition, Bona adhesives will not damage or stain pre-finished surfaces and from a safety perspective, contain zero VOCs or Isocyanates and are EMICODE 1PLUS® certified for very low emissions.

Titanium Cross-linking Technology

Using Titanium Cross-linking technology with 4-way curing means fast initial bond and curing time so floors can be put into full use or sanded and finished in as little as 12 hours. With up to 150% greater early tensile strength than other flooring adhesives, Bona silane adhesives’ superior initial bond or ‘Green Grab’ means the flooring is held firmly to the substrate with fewer hollow spots.

Built-in Moisture Barrier

Bona silane adhesives form a dense layer that significantly reduces and slows down water vapour transmission from the substrate to the wood flooring.

Acoustic Insulation

Bona silane-based adhesives demonstrate significant acoustic insulation properties. Noise transfer can be reduced as much as 10dB by using Bona adhesives. Further gains can be attained if used in conjunction with acoustic matting.

Solvent Free & Zero VOCs

Silane-based adhesives from Bona provide a healthier environment compared to solvent-based products. Stringent certifications enable architects, designers and installers to ensure a safer environment for their project clients. Zero VOCs, isocyanates free, classified as non-hazardous.

Freshly Squeezed, Everytime

Our smart resealable tubular packs mean your adhesive is freshly squeezed and there is no pre-hardening and minimal waste to dispose of before starting the work. The result is an optimised use of the adhesive content, generating cost savings and more square metres out of the package.

Resealable Tubular Bags

Foil tubes can easily be resealed and reopened at a later date without waste. The adhesive always stays fresh, so compared to plastic buckets, Bona adhesives are more cost effective.

Less Plastic Waste

No more bulky plastic tubs, just innovative tubular packs which keep the adhesive fresh and eliminate waste. Bona tubular bags means that the use of bulky plastic tubs is eliminated. So less mess on the job site, less rubbish to dispose of and less hard plastic waste into public landfill.

Adhesives 8PP Broch Download View Adhesives Range